Working Principle
Filtered Process Air
Humid process air first passes through the G4 filter to remove dust and particles before entering the drying section.
Desiccant Moisture Removal
The process air fan drives air through the rotating desiccant wheel, where moisture is adsorbed and dry air is produced.
Heated Regeneration Air
A separate airflow is filtered and heated, then directed through the regeneration zone to release moisture stored in the wheel.
Moisture Exhaust
The regeneration fan removes the warm, moisture-laden air from the unit while the rotor continues rotating.
Continuous Drying
Adsorption and regeneration occur simultaneously, allowing the dehumidifier to maintain stable and continuous moisture removal.
Product Parameters
| Model | Dehumidification Capacity (20°C, 60% RH) | Power Supply | Rated Power | Maximum Power | Rated Current |
| MCH-4000XF-02 | 25 kg/h | 380V / 50Hz | 30 kW | 35 kW | 60 A |
| Process Airflow | Reactivation Airflow | Process Air External Static Pressure | Reactivation Air External Static Pressure | Process Air Duct Size | Reactivation Air Duct Size |
| 4200 m³/h | 1500 m³/h | 400 Pa | 280 Pa | 500 × 400 mm × 2 | 300 × 200 mm × 2 |
| Desiccant Rotor Size | Filtration Device | Operating Temperature | Dimensions (L×W×H) | Weight | Humidity Setting Range |
| 800 × 200 mm | Primary Filter | -10°C–50°C | 1400 × 1000 × 1000 mm | 380 kg | 5%–95% RH |
Integrated Structure & Control Design
- Compact Cabinet: Overall dimensions of 1400 × 1000 × 1000 mm provide an integrated structure for industrial installation.
- Intelligent Monitoring: Built-in humidity sensor and RS-485 communication support humidity monitoring and external system integration.
- Operating Control: Control panel, thermostat, rotary switch, and standby / run / fault indicators provide straightforward operation.
- Service-Friendly Design: Dedicated maintenance access and centralized electrical control box simplify inspection and servicing.
Circuit Diagram
