Working Principle
Process Air Drying
Humid air is filtered and pushed through the desiccant wheel. Moisture is captured by the rotor, and dry air is then supplied to the controlled area.
Wheel Regeneration
A separate reactivation air stream is filtered and heated before passing through the regeneration section of the wheel.
Moisture Discharge
The heated air removes stored moisture from the desiccant material and carries it out through the regeneration air outlet.
Continuous Operation
The rotating wheel allows drying and regeneration to occur continuously at the same time.
Product Parameters
| Model | Dehumidification Capacity (20°C, 60% RH) | Power Supply | Rated Power | Maximum Power | Rated Current |
| MCH-5000XF-01 | 29 kg/h | 380V / 50Hz | 36 kW | 40 kW | 70 A |
| Process Airflow | Reactivation Airflow | Process Air External Static Pressure | Reactivation Air External Static Pressure | Process Air Duct Size | Reactivation Air Duct Size |
| 5000 m³/h | 1700 m³/h | 400 Pa | 280 Pa | 500 × 400 mm × 2 | 300 × 200 mm × 2 |
| Desiccant Rotor Size | Filtration Device | Operating Temperature | Dimensions (L×W×H) | Weight | Humidity Setting Range |
| 800 × 200 mm | Primary Filter | -10°C–50°C | 1400 × 1000 × 1000 mm | 380 kg | 5%–95% RH |
Control & Maintenance Features
The unit integrates monitoring, control, and maintenance functions into a compact industrial cabinet for easier operation and system integration.
- RS-485 Communication: Supports external monitoring, data transmission, and system integration.
- Humidity Sensor: Provides real-time humidity feedback for automatic control.
- Status Indicators: Standby, run, and fault lights clearly show operating conditions.
- Control Panel: Includes thermostat and rotary switch for convenient local operation.
- Cooling Fan: Helps maintain stable internal electrical and control conditions.
- Maintenance Access: Dedicated service panel simplifies inspection and component maintenance.
Circuit Diagram
